R-7902钢筋

SECTION 32 39 13.21

SURFACE MOUNT METAL BOLLARDS

GENERAL

1. 概括
   1. 部分包括：
      1. 表面架子金属柱线。
      2. Accessories
      3. [_________________]
   2. 相关要求：
      1. [分区03节：[Concrete] [砂浆]填充安全职位。]
      2. [分区08部分：挂锁。]
      3. [_________________]
2. 参考标准
   1. ASTM A36 – Standard Specification for Carbon Structural Steel.
   2. ASTM A312 – Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes.
   3. ASTM A500 – Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes.
   4. ASTM A536 – Standard Specification for Ductile Iron Castings.
   5. ASTM B26 - 铝合金砂铸件的标准规范。
3. SUBMITTALS
   1. 遵守[01 33 00 - 提交程序。] [_________]。
   2. 产品数据：提供指定的每种类型的系柱，组件，饰面和附件。
   3. Color Samples: [Submit manufacturer’s standard colors for selection.] [Submit sample of color specified.]
   4. 设置图：显示其他部分指定的工作所需的嵌入式项目和切口。
   5. 维护数据：提交制造商的现场修饰，清洁和维护说明。
   6. Warranty Documentation: Submit sample of manufacturer’s warranty.
4. QUALITY ASSURANCE
   1. Comply with Section [01 43 00 – Quality Assurance.] [_________.]
5. 交付，存储和处理
   1. Comply with Section [01 66 00 – Product Storage and Handling Requirements.] [_________.]
   2. Protect bollards and accessories during delivery, storage, and handling.

亚博账号审核不过

1. 制造商
   1. Manufacturer: Reliance Foundry Co. Ltd.
      1. Phone: 604-547-0460 or 1-877-789-3245
      2. 传真：604-590-8875
      3. 网站：//www.paceacca.com/bollard
      4. 电子邮件：[email protected]
   2. Substitutions: [Comply with provisions of [Section 01 25 00 "Substitution Procedures"] [_________] for substitution procedures.] [Not allowed.]
2. SURFACE MOUNT METAL BOLLARDS
   1. 材料: ASTM A36; 25 percent recycled-material content.
   2. 原籍国：中国
   3. Bollard [设计师的名称]：
      1. 模型：Reli亚博棋牌官网首页ance Foundry；r-7902。
      2. Height: 36 in (91.4 cm)
      3. Diameter: 4-1/3 in (10.9 cm)
      4. Weight: 29 lbs (13.2 kg)
      5. Design: Cylindrical with rounded top.
      6. 颜色涂料：
         1. Type: Polyester powder coat over epoxy primer.
         2. Color: [Black textured semi gloss.] [Dark green.] [Statuary bronze.] [Bengal silver.] [Anodized silver.] [Safety yellow.]
      7. 反射条纹：[白色] [Yellow] [蓝色] [无]
      8. 安装:
         1. Fixed, new concrete, embedded.
         2. 固定，现有的混凝土，法兰，表面安装。
         3. 可移动，新混凝土，接收器。
            1. [钢] [不锈钢]带盖的接收器。
            2. [钢] [不锈钢]带有链条的接收器。
         4. Removable, existing concrete, receiver.
            1. [钢] [不锈钢]带盖的接收器
            2. [钢] [不锈钢]带有链条的接收器。
            3. 可折叠的，带有铰链接收器和挂锁HASP的钢表面安装。
3. 配件
   1. 安全帖子：钢管，ASTM A500，B级。
      1. Manufacturer: Reliance Foundry Co. Ltd.
      2. 原籍国：美国。
      3. 完成：[红色] [灰色]底漆。
      4. 安装:
         1. 直接嵌入。
         2. Footing and fill; Concrete or mortar, [3000 psi minimum.]
   2. 挂锁：
      1. [黄铜] [海洋级]，提供[Bollard制造商提供] [如[__ __ __ __ __]]]。[关键。]
   3. 链：
      1. 5/16英寸镀锌钢链，30级，具有快速释放类型的连接。
      2. 链眼：5/16英寸直径钢。
      3. 快速链接：带有桶螺母闭合的粉末涂层链链路。
      4. 完成：涂层粉末以匹配系螺栓。[_______________]。

执行

1. EXAMINATION
   1. 检查铺路或其他底物，以符合制造商对嵌入式物品的放置和位置的要求，底物的条件以及影响柱塞安装的其他条件。
   2. Proceed with installation only after unsatisfactory conditions have been corrected.
2. 安装
   1. 一般：符合制造商的安装说明和设置图。
   2. Do not install damaged, cracked, chipped, deformed or marred bollards. Field touch-up minor imperfections in accordance with manufacturer’s instructions. Replace bollards that cannot be field repaired.
3. CLEANING & PROTECTION
   1. 保护柱柱免受损坏。
   2. Immediately prior to Substantial Completion, clean bollards in accordance with manufacturer’s instructions to remove dust, dirt, adhesives, and other foreign materials.
   3. 根据制造商的说明，修饰损坏的饰面。
4. CLOSEOUT ACTIVITIES
   1. Provide executed warranty.

部分结尾